LENCO SB-210 BT, Руководство пользователя

Страница: 8 / 16

GB-8
7. During playback, press TUNING/SKIP/SEARCH FORWARD button to skip to
the next track; press TUNING/SKIP/SEARCH BACKWARD button twice to
skip to the previous track.
8. During playback, press and hold TUNING/SKIP/SEARCH buttons to search
through the current track forward or backward.
Note:

Pairing mode is canceled about 1.5 minutes.

The above are generic steps to pair a BLUETOOTH® device, for more
specific instructions on BLUETOOTH® connectivity for your device, please
consult your manufacturer’s manual.

Once the unit enters to the BLUETOOTH® mode, it will connect to the last
paired external BLUETOOTH® device automatically.
RE-CONNECT TO THE BLUETOOTH® AUDIO SOURCE DEVICE
If the device is already paired with the SB-210 BT, but became unconnected
even with both Bluetooth® devices turned on. You can re-connect them by
following steps:
1. Press and hold the PAIR button on the unit or on the remote to re-link the
audio source device. The Bluetooth® indicator will blink for about 1.5 minutes
for connecting.
2. Select SB-210 BT on the audio source device for connecting. Bluetooth®
indicator will turn to solid blue if the SB-210 BT and the device have been re-
connected successfully.
EQ EFFECTS
During playback, press EQ button on the remote repeatedly to cycle through the
EQ options; when your desired EQ effect shows on the screen, release the
button.
FM RADIO
TUNING THE FM RADIO
1. Power on the unit, switch to FM (RADIO) mode by pressing SOURCE button
repeatedly.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio
station. Press and hold the TUNING/SKIP/SEARCH buttons on the remote to
auto search radio station forward or backward respectively (When an
available station will be found, the unit will broadcast it immediately and the
searching will be stopped). During auto searching, press the
TUNING/SKIP/SEARCH buttons on the remote to stop the searching.
3. At radio mode, it is possible to access the frequency via numeric buttons on
the remote control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz.