LENCO Play connect Скачать руководство пользователя страница 8

Страница: 8 / 10

EN -

- EN

LENCO PLAYCONNECT INstruction MANUAL

9. Trouble shootings

Windows 7 and above only: Please check if you allow your PC to

share the contents on the network (right click on Network in your

PC+ share contents).

Check if you don’t have an active firewell which can block the

streaming from the PC or from the NAS.

When you receive error screen (Figure A) your router setting must

be changed from WPA to WPA2 or WPA2-PSK. Please check

your instruction manual of your router, or contact the helpdesk

of the router.

- You must “push and hold” for 10 seconds the reset button

of the Playlink speaker. ( this because you had stopped in the

middle of the installation procedure)

- For android device we advise to go to the settings, app’s, All,

go to your internet browser and clear cache, refer to Figure B.

(this because your browser could go to addresses saved in its

memory which are no longer available)

Please make sure to wait at least one minute after POWER-

ON before try to connect your audio device to a router.

Reset your device (Press the RESET key at the back more

than 5 seconds, see page 4) wait one minute, and try again.

If the audio device was already associated to a WiFi network

and you want to connect it to another net-work, you must

factory reset the device (see above)

Try to associate your audio device using the browser of a

personal computer (see page 6).

Please make sure your mobile device (mobile Phone/tablet)

is connected to the same network as your device.

After open the APP, wait 30 seconds to one minute to see the

device, depending the speed of your network. The system

need tie to publish the device on the network becoming

recognizable by the APP.

If after try to restart the App and/or the audio device,

checked if all is connected to the same WiFi network and

still cannot see the unit, switch OFF mobile phone and

disconnect the audio device from the main power and then

restart all your system.

The system does not support the WMA formats, if you have

those songs, please convert it to MP3.

Some songs bought on music’s stores (for example Apple

store) contains restricted rights and cannot be played.

Main Features

• WiFi connection, dual band 2.4 & 5 GHz-2R2
• DLNA compatible
• Quick Connect to Home WiFi network function
• Supports Direct Mode (direct access point) or network router connection
• Party mode ( Router mode only)
• Multi-zones / Multi-room operation (router mode only)
• Operation: 1 keys on front with Multi-color LED indicator; 2 keys on back
• Power input AC adaptor: 100-240V ~ 0,2 A, 50-60Hz
• Power consumption in ON mode : < 5 W
• Standards: CE, LVD, ERP2, REACH, ROHS
• Power supply adaptor:

Manufacturer: Kingwall, Model no: AS050-050-EE100
use only the power supply listed in the user instructions

English

This product operates at 2400 - 2483.5 MHz 5.15-5.725GHz and is designated only

to be used inside a normal household environment. This product is suited for this purpose

within all EU countie.
Hereby, STL Group BV, Ankerkade 20 NL 5928 PL Venlo, declares that this product is in

compliance with the essential requirements and other relevant provisions of Directive

1999/5/EC.
The declaration of conformity may be consulted at:
htps://lencosupport.zendesk.com/forums/22413161-CE-Documents
Android is a trademark of Google, Inc.
Wi-Fi is a registered mark of the WiFi Alliance.
iPhone is trademarks of Apple Inc., registered in the U.S. and other countries.

Europe - EU Declaration of Conformity

Cannot associate

my device to my

router

I cannot see my

device in the APP

Some songs can-

not be played

Cannot see your

PC on the net-

work

Cannot play songs