6
BLUETOOTH
Press the INPUT SWITCHING Button until the BLUETOOTH
Indicator blinks. The
BLUETOOTH function is ON. Turn on the BLUETOOTH in device and start searching for this
BLUETOOTH speaker. You will find device name of
LENCO PA-85
. Select this to link to the
speaker. The
Indicator will stop blinking and light up in BLUE color when you are successfully
linked. After the linking, you can start to play music from your device.
When Bluetooth is paired and connected, you can press and hold the play/pause button to
disconnect the current connection and re-pairing once.
POWER SUPPLY SELECTION
Back Panel:
1.
Power Jack: Insert the power cord to this jack and connect to AC 230V 50-60Hz.
2.
Power Source Switch: AC INPUT, F.CHARGE/OFF, DC INPUT
3.
AC Power Switch: AC ON, OFF, CHG ON
How to Use the Switch:
AC Power Supply, connect the power cord to AC230V 50-60Hz, switch the Power Source
Switch to
AC INPUT,
and switch the AC power switch to
AC ON.
To turn the system off,
switch both to
OFF.
Internal DC Power Supply, now the system is powered by built-in battery (12V, 4.5Ah).
Switch the Power Source Switch to
DC INPUT,
and switch the AC power switch to
AC
OFF.
To turn the system off, switch both to
OFF.
To charge the system, connect the power cord, switch the Power Source Switch to
F.
Charge
and switch the AC power switch to
CHG ON.
To use and charge the system in the
same time, switch the Power Source Switch to
AC INPUT,
and switch the AC Power
Switch to
CHG ON.
External DC power supply: DC12-15V (Min. 50W). Turn OFF the AC POWER Button and
unplug the power cord from the AC outlet. Then turn the POWER SOURCE button to DC
INPUT. Then, connect the positive pole of your external power supply to the RED terminal
and connect the negative pole to the BLACK terminal in speaker back panel as the below
picture. The speaker here is powered by external DC power supply. This operation is for
reserve usage when battery runs out of power.
BATTERY PANEL
This panel is to be opened ONLY when replacing a new battery by qualified service centers. To
avoid any potential dangers and damages to the battery, please make sure that the new battery
are of the same specification with the original battery. Please follow the below steps properly:
1. Remove the 6 outlying screws and take out the panel.
2. Take out the battery and press the clinching fasteners to unplug the lead wires. Please work
carefully to avoid damages.
3. Remove the 2 screws on the metal-battery-fame.
4. Replace with the new battery. Be sure that the new battery is of the same specification with
the original battery. Connect the Red cable to the Red Terminal and Black cable to Black
Terminal. After inserting and plugging the terminals, please make sure that the connections
are fixed tightly without any loose.
5. Screw back both metal-battery-frame and battery panel.
