LENCO PA-360BK, Руководство пользователя

Страница: 20 / 88

20
●
Devices with class 2 construc ti on do not require a earthed connec ti on.
●
Always hold the plug when pulling it out of the main supply socket. Do not
pull the power cord. This can cause a short circuit.
●
Do not use a damaged power cord or plug or a loose outlet. Doing so may
result in fi re or electric shock.
28. If the product contains or is delivered with a remote control containing coin/cell
ba tt eries:
Warning:
●
“Do not ingest ba tt ery, Chemical Burn Hazard” or equivalent working.
●
[The remote control supplied with] This product contains a coin/bu tt on cell
ba tt ery. If the ba tt ery is swallowed, it can cause severe internal burns in just
2 hours and can lead to death.
●
Keep new and used ba tt eries away from children.
●
If the ba tt ery compartment does not close securely, stop using the product
and keep it away from children.
●
If you think ba tt eries might have been swallowed or placed inside any part of
the body, seek immediate medical a tt en ti on.
29. Cau ti on about the use of Ba tt eries:
●
Danger of explosion if ba tt ery is incorrectly replaced. Replace only with the
same or equivalent type.
●
Ba tt ery cannot be subjected to high or low extreme temperatures, low air
pressure at high al ti tude during use, storage or transport ati on.
●
Replacement of a ba tt ery with an incorrect type that can result in an
explosion or the leakage of fl ammable liquid or gas.
●
Disposal of a ba tt ery into fi re or a hot oven, or mechanically crushing or
cu tti ng of a ba tt ery, that can result in an explosion.
●
Leaving a ba tt ery in an extremely high temperature surrounding
environment that can result in an explosion or that leakage of fl ammable
liquid or gas.
●
A ba tt ery subjected to extremely low air pressure that may result in an
explosion or the leakage of fl ammable liquid or gas.
●
A tt en ti on should be drawn to the environmental aspects of ba tt ery disposal.
INSTALLATION
• Unpack all parts and remove protec ti ve material.
• Do not connect the unit to the mains before checking the mains voltage and before
all other connec ti ons have been made.