LENCO NXT-01, Руководство пользователя

Страница: 13 / 36

- 12 -
SETTING THE CLOCK
When the system is connected to the AC outlet for the first time and --:-- will
keep flashing on the display. This is your indication that the time display is
incorrect and needs to be reset.
Set the Clock time in the Standby mode.
1.) While the unit is in the Standby mode, press and
hold the CLOCK/PROG button on the remote
control for 3 seconds to enter Clock Set mode. 24
HOUR shows with 24 keep flashing in the display
indicating that the clock is set for 24-hour European
time.
2.) Press the SKIP/TUNE or buttons on the top
panel or on the remote control once to change the
clock format to 12 Hour American time. The
display will change from 24 HOUR to 12 HOUR .
3.) Press the CLOCK/PROG button again to confirm.
The Hour digits will begin flashing.
4.) Press the SKIP/TUNE or buttons on the top
panel or on the remote control to set the display to
the correct Hour, AM or PM.
Note: If you choose 12 hour format, the first 12 hour is for AM, and the next 12
hour is for PM.
5.) Press the CLOCK/PROG button again the top panel or on the remote control,
the Minutes digits begin flashing.
6.) Press SKIP/TUNE or buttons on the top panel
or on the remote control to set the display to the
correct Minute.
7.) Press the CLOCK/PROG button once more. The time display stops flashing
and the clock begin to run.
Note: The correct time will appear on the display when the system is in the
Standby Mode.