E.
Getting Start Player
Turn Player ON / OFF and Playing Music:
1.
Plug the stereo earphone plug into the earphone output jack. Press and hold
button to turn ON the
Player. The music will play and status LED indicator will light and flashing.
2.
To turn OFF the Player, press and hold
button.
To Adjust Volume Levels
3.
Press the
“VOL / S”
to enter volume control mode, the LED light will stop flashing for 6 – 8 seconds.
Then,
4.
Pressing or press and hold
“
/
-
“ or “
+
/
”
button to decrease / increase volume levels before
the LED light flashing again.
To Play / Pause Music
5.
In music playing mode, press
button to pause playing music
6.
Press
again to continue the play.
To Changing Music
7.
Press
button to change to next song.
8.
Press
button to change to previous song.
9.
Press and hold
button to fast forward music.
10. Press and hold
button to fast backward music
To Change Normal / Shuffle
11. Press and hold
“VOL / S”
button for 2 - 3 seconds to enter “Shuffle” play mode and the LED light
flashing will turn to slow for about once per 2 seconds.
12. Press and hold
“VOL / S”
button for 2 – 3 seconds again to return to “Normal” play mode and the LED
light flashing will turn back to normal as music playing mode for about once per seconds.
F.
To Reset Player
In some circumstances the device may hanging and need to reset. This player has design with built-in a
mini tact switch which located at the behind of the earphone jack, so it can provide the reset function to restart
the device pass through the earphone jack hole.
To Reset
1.
Use a wooden stick (less than 2mm dia.) or similar object, such as tooth stick and cut out the sharp side,
and carefully insert the stick, use dull side, into the earphone jack hole until you feel to hit the end.
Actually that is the tact switch button surface.
2.
Then add a bit of force and you will get a click sound and feeling return from switch. The device is reset,
all settings are back to factory default and the device will go into music playing mode automatically.
Important: Do not reset the device if it is proper working.
