~ 13 ~
Playing a Disc
Preparation for Playback
Play
Press (on the remote control) or (on the Player) to
start play.
1. Make sure the unit has the power from the AC adaptor.
2. Loading a disc, follow these steps:
Lift the screen (disc compartment cover) on the Player to
access the disc compartment.
Place a disc into the tray with the label side facing up.
Close the disc cover.
3. Turn on the power of the Player .
Slide
POWER
to
ON
.
Adjusting volume
Press
VOL+
or
VOL-
on the remote control or volume
on the Player to change volume.
Dial
Turning ON /OFF the player
1.To Turn On the Player
Slide
POWER
on the Player to
ON
, the LED lights and if
there is a disc in the disc compartment, playing will start
automatically.
2. To Turn Off the Player
Simply slide
POWER
to
OFF
.
3. To Turn On the Second
LCD Screen.
Slide
POWER
on the screen to
ON.
4. To Turn Off the Second
LCD Screen.
Simply slide
POWER
to
OFF
.
Resume
There are two ways to resume your playback when interrupted.
Method 1.
-- for short time interruption
1. Press
STOP
( ), the Player remembers where you stopped.
2. To resume, press PLAY, the Player will play from where you
stopped.
Method 2.
-- for longer time interruption
1. Press OPEN to open the disc compartment door
during playing
.
2. You can turn off the power, and even remove the disc from the
Player
, when you turn on the power and replace the disc, the
Player will play from where you stopped.
1. Enable the last memory in the setup menu.
1. Press on the remote to temporarily stop the playback, " "
appears on the screen.
2. Press again to stop the playback.
Stop
1. During playback, press (on the remote) or (on
the player) to pause.
2. Press (on the remote) or (on the player) to resume
playback.
Pause
Содержание MES-330
Страница 2: ......
