11
CD/USB OPERATION
Loading and Playing CD Disc
Open the CD door. Install a disc with the CD graphic side facing up. Close the CD door. Press the SOURCE button to CD mode. After
reading the total number of tracks will be shown on the display. Press the CD/USB PLAY/PAUSE
button to play.
Reading and Playing USB Device
Insert a USB device into the USB input jack. Press the SOURCE button to USB mode. After reading the total number of tracks will be
shown on the display. Press the CD/USB PLAY/PAUSE
button to play.
Play/Pause Control
To pause playback press the CD/USB PLAY/PAUSE
button. Press the button again to resume playback.
Stop Control
To stop playback press the STOP button.
Skip Track
During playback press the PREVIOUS
or NEXT
button to search to the previous or next track.
Random Play
During playback press the RANDOM button to play music in random order. The display will show “RANDOM”. Press the RANDOM
button again to resume normal playback.
High-Speed Music Search
During playback press & hold the PREVIOUS
or NEXT
button to start high-speed searching.
When you release the PREVIOUS
or NEXT
button normal speed playback will resume.
Repeat Playing
During playback press the REPEAT
button once the display shows “RPT ONE”. The current track will be played repeatedly. Press the
REPEAT
button again the display shows “RPT ALL”. All tracks will be played repeatedly. Press the REPEAT
button again to
resume normal playback.
In case of MP3 file folder playback, there is a repeat folder as well and the display will show “RPT FOLD”.
Folder Select (MP3 file only)
During MP3 playback press the FOLDER
or FOLDER
button to change the folder.
In stop mode press the FOLDER
or FOLDER
button to change the folder. Then press the PREVIOUS
or NEXT
button to
select your desired track to play. Press the PLAY/PAUSE
button to start playback the track.
ID3 Tag Display (MP3 file only in which the ID3 Tag information is included)
Press the DISPLAY button will toggle the ID3 Tag display on/off. When it is on, the MP3 track’s title, artist and album details will be
displayed.
BLUETOOTH AUDIO
Please follow the pairing instructions below to link the unit to your Bluetooth device.
1.
Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “BT”. It will start searching and will
display a flashing “PAIRING”.
2.
If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the
Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the search until “Lenco
MC-150” is found. Select “Lenco MC-150” on the Bluetooth device to make connection. Enter the pass code “0000” if required.
3.
After successfully paired the unit will display “BT AUDIO”.
4.
You can now start playing music from your smartphone wirelessly to the speaker.
5.
You can press the BT PLAY/PAUSE
button to pause or resume the playback.
6.
You can press the BT PREVIOUS
or BT NEXT
button to search to the previous or next song.
AUX IN
This allows you to connect an external player’s sound through your unit.
1.
Plug a 3.5mm audio cable (not included) into your external player’s line out and the other end into the AUX IN jack.
2.
Press the SOURCE button to enter AUX mode. Display shows “AUDIO IN”
3.
Start your external player to play music.
4.
The unit will output the sound.
