-
The alarm icon (Alarm 2) appears and the TIME display is blinking.
-
Repeat same step as alarm 1 in order to set Alarm 2.
To select which of the 2 alarms should be active, press the ALARM SET button repeatedly while the unit is in standby
mode (clock display). The display will show consecutively the Alarm 1 icon, the Alarm 2 icon, the both Alarm icons. Press
the ALARM SET button once again to deactivate the alarms (no alarm icon will be displayed).
SNOOZE FUNCTION
If you want to snooze a few more minutes press the SNOOZE BUTTON will deactivate the sound for approximately 9
minutes.
SHUT OFF ALARM:
When alarm goes off, press the STANDBY BUTTON to turn off alarm, the alarm will reset until the next day
SLEEP FUNCTION
-
In standby on mode
-
Press the button (2) to the desired source.
-
Press and hold the SLEEP button (9). The “90” will appear on the display.
-
Repeatedly press the SLEEP button (9) for desired sleep time between 90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes.
-
The unit will automatically switch off when the SLEEP time expires.
-
To turn sleep mode off, press the SLEEP button (9) until “OFF” is displayed.
RADIO OPERATION
-
Press the STANDBY button (2) until the frequency shown on the display
How to use the buttons for radio
-
Press the backward (7) or forward (8) button to search for desired frequency.
Automatic Tuning
-
Press & hold the backward (7) or forward (8) button until the display frequency starts run
-
When a station of sufficient strength has been found Tuning will stop or you can stop the automatic tuning by
pressing backward (7) or forward (8) button.
-
To turn off the radio, Press and hold the STANDBY (2) button.
UNIVERSAL SERIAL BUS PORT FUNCTION (USB) to listen
-
Press the STANDBY (2) button until USB icon shown on the display
-
Connect USB disk into the USB (11) port of the system.
-
The USB disk will play automatically
-
Press the PLAY/PAUSE again to stop playing temporarily Resume normal play by pressing the PLAY/PAUSE button
again.
-
To stop playback, press and hold the STOP (3) button. The total number of tracks will be shown on the display.
-
To turn off the unit, Press and hold the STANDBY (2) button.
AUX INPUT JACK
-
Press the STANDBY (2) button until AUX icon shown on the display
-
Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player to the AUX
input jack.
-
Play Start from your Personal Player and adjust the volume
