10
11
The unit provides an iTunes connector located at rear of the unit and let
you implement the iTunes function without unplug the iPod from the
docking station.
1. Connect the mini USB connector of the USB cable to the mini USB
connector located at rear of the unit.
2. Connect the USB connector at the other end of USB cable to the USB
port of a computer.
3. An iPod is docked at the docking station and iPod mode is selected.
4. Operate iTunes feature from the computer (internet) as usual.
iTunes operation
Listening to an External Audio Source
The model comes with two Auxiliary audio line-in cables with 3.5mm stereo
plugs (length 1M and 1.5M) to suit your application.
When the unit is at power off mode, where the Red colour power status
indicator is on.
Press the POWER (STANDBY) button once to turn on the unit and the
power status indicator turns Blue.
Note
: Press the POWER button will toggle between iPod and AUX-IN mode,
the Blue power indicator on.
Eng
Eng
(note: below functions can only be set with the remote control.)
Treble setting :
Press the TREBLE button once entering Treble setting mode, the status
indicator blinks between Pink and Blue light.
During the status indicator blinks (Pink/Blue), press VOLUME button to
adjust to the desired Treble level.
The unit will auto-exit Treble setting mode after few seconds and the Blue
status indicator stay on.
Bass setting :
Press the BASS button once entering Bass setting mode, the status
indicator blinks between Pink and Blue light.
During the status indicator blinks (Pink/Blue), press VOLUME button to
adjust to the desired Bass level.
The unit will auto-exit Bass setting mode after few seconds and the Blue
status indicator stay on.
EQ setting :
The unit is designed to have four EQ presets for your selection , the
ROCK , POP , CLASSIC and JAZZ.
Press EQ button to select your desired preset EQ effect.
Press and hold the EQ button around 2 seconds to disable the EQ.
Note : When EQ effect is selected , it will override the previous Treble and Bass setting.
-
-
-
-
-
-
-
-
-
EQ preset , Treble and Bass Setting
1. Connect the audio cable with 3.5mm stereo plug to the LINE IN Jack
located at rear of the unit.
2. Connect the other end of the cable to a Line Out Jack or Headphone Jack
of your external audio device.
3. Turn on the external audio device.
4. Press the POWER button to select AUX-IN mode. Listen to the speaker
output that the music is input from the external audio source which is to
certain current AUX-IN mode.
5. The volume level can now be controlled through the main unit. Operate
all other functions on the auxiliary device as usual.
Note
:
(1) If you connected the Line Out Jack of your external device then you only
need to adjust the volume control of this unit. If you connected the
Headphone Jack of your external device then you may need to adjust both
the volume control of your external device and the volume control of this
unit to find the most desirable volume setting.
(2) Press and hold the POWER button turning off the unit (the power status
indicator turns red) when you finish listening.
Don't forget to switch off power of your external device as well.
