LENCO DVT 1926, Руководство пользователя, Страница: 8 / 17

E7
BASIC OPERATIONS
Make sure all necessary connections are correctly connected before turn on the power.
Press the power switch (I/O) (rear of the unit) to turn on the power.
The power indicator turns red and the unit is in the standby mode.
Turn on/off the power
Press [ z ] to turn on the main unit. The power indicator turns blue.
Press [ z ] again can turn off the main unit.
The unit is automatically set to the standby mode.
The power indicator turns red.
If not to use the main unit for a long time, press the power switch (I/O) to shut down the power, and unplug the power cord from the AC outlet
(rear of the main unit).
Select the input source
Turn on the connected necessary external device.
Press [SOURCE] to select the proper input source.
The input source menu appears.
Select the TV channe
l
After selected "TV" as input source, you can do either one of followings to select your channel.
Press [- P] (or [ o CH] or [CH p
]
on the main unit).
Press [0, 1~9] (or [ -/-- ] combined) to input the channel number directly.
Press [
] to go back the previous channel you've watched last time.
•
•
•
1. Press [ o / p ] to move the high-lighted bar to the desired source item.
2. Press [ a ] to con fi rm.
TV
AV
SVIDEO
SCART
VGA
PC
DVD
HDMI
Select the OSD language
The factory setting of OSD ( On Screen Display) language is “English”. If you are used to use other language, for your
convenience, you can change it to your desired language which supplied
fi rstly
.
1. Press [MENU], OSD menu appears.
2. Press [
p ] until
“
Function” menu appears.
3. Press [ a ] to enter the setting menu, and
“
Language” is high-lighted.
4. Press [ b / a ] to set the language to your desired language.
5. Press [MENU] to quit the menu.