~ 22 ~
Playing a Disc
1. Make sure the Player has the power either from the battery
or the AC adaptor.
2. Load a disc, following these steps:
Open the top cover.
Press the
OPEN
button to open the disc cover.
Place a disc into the tray with the label side facing up.
Close the disc cover.
3. Slide
POWER
to
ON
to turn on the power.
4. Use to select
DVD-ROM Drive
mode, press to
confirm.
Preparation for Playback
Play
1. Press on the remote to temporarily stop the playback, " "
appears on the screen.
2. Press again to stop the playback.
Stop
Adjusting volume
Press
VOL+
or
VOL-
(on the remote control) or the
VOLUME
control
knob
on the Player to change volume .
1. During playback, repeatedly press to play one frame at a
time.
Frame-by-Frame Playback
Resume
You can skip chapters on DVD-Video, tracks on CDs, and
Video CDs.
1. To skip forward, press during play ,it skips to the next
chapter or track. Each press increases the numbers of skips.
2. To skip to the previous chapter or track, press .
Skip
There are two ways to resume your playback when interrupted.
Method 1.
-- for short time interruption
1. Press
STOP
( ), the Player remembers where you stopped.
2. To resume, press , the Player will play from where you
stopped.
Method 2.
-- for longer time interruption
1. Press OPEN to open the disc compartment door.
2. You can turn off the power, and even remove the disc from
the desk, when you turn on the power and replace the disc,
the Player will play from where you stopped.
Press (on the remote control) or (on the player) to
start play.
1. During playback, to fast forward, repeatedly press to
increase the fast forward speed 2x, 4x, 8x, 16x, 32x.
2. During playback, to fast rewind, repeatedly press to
increase the fast reverse speed 2x, 4x, 8x, 16x, 32x.
3. To resume normal playback, press .
Fast Forward and Reverse
2. To resume normal playback, press .
You can only perform step play in forward playback.
Содержание DVP-747
Страница 2: ......
