9
Replacing the battery
Remove screw 1 on the back side of the player. Now the battery cover can be removed. Remove
the battery from the player by pulling the cable and plug into direction 2. Connect the new battery
to the main unit repeat these steps in opposite direction.
4.3. Turning the player on/off
Make sure that the battery is charged or that the player is connected to a power source. To turn
on the player slide the ON/OFF switch (17) into on position. To turn off the player side the ON /
OFF switch into off position.
4.4. Playing a disc
Inserting a disc
Before you insert a disc make sure that the player is in off mode. Press the disc cover open
button to open the disc cover. Insert a disc with the label side up and press on the disc cover to
close the disc door. Now the player will start to read & play the disc automatically. The player will
automatically navigate to the disc menu.
IMPORTANT NOTES:
All the functions described below are defined from out playback mode.
Some of the functions described below may function different because they depend on disc
specification.
RETURN TO DISC MENU
Press MENU button to return to the disc menu.
Skip ahead or back
Press PREVIOUS or NEXT button once to skip a chapter (DVD) or a track (CD) ahead or
backwards.
RAPID ADVANCE/REVERSE
Press and hold FAST BACKWARD or FAST FORWARD button several times to scan the disc
forward or backward at X2, X4, X8, X16, X32 normal speed. Press PLAY/PAUSE button to
resume normal play.
STOP PLAYBACK
Press STOP button to stop playback; press PLAY button to resume playback at the point it
stopped previously; press the STOP button twice to clear the resume function. Press and hold the
STOP button to switch between DVD, MCR (Media Card Reader) and USB mode.
SLOW-MOTION PLAY
Press and hold ZOOM/SLOW button on the remote control, the Disc will be played at 1/2 normal
speed at first, each time this button is pressed, the play speed becomes slower at 1/4,1/8 and
1/16 speed.
1
2
