Setup Menu System
18
Use the Up and Down arrow button to move the scroll and adjust the brightness.
CONTRAST
Use the Up and Down arrow button to move the scroll and adjust the contrast.
HUE
Use the Up and Down arrow button to move the scroll and adjust the hue.
SATURATION
Use the Up and Down arrow button to move the scroll and adjust the saturation.
SHARPNESS
Use the Up and Down arrow button to move the scroll and adjust the saturation.
e)
SPEAKER SETUP
DOWNMIX
Use the Up and Down arrow button to move the scroll and adjust the saturation.
z
LT / RT: Choose this setting, it will sound like in a movie theatre if the original
movie the disc was recorded from was encoded in the Pro Logic Dolby Digital
format.
STEREO: Choose this setting, two channels of signals will be output from the left and
right soundtrack.
z
VSS: Fake 5.1CH output
f)
DIGITAL SETUP
The video setup options are illustrated below:
OP MODE
z
LINE OUT: Choose this setting to line out the input signal. It will be more suitable
for playing in the night, for the output volume is low.
z
RF REMOD: It will be more suitable to choose this setting for playing in the day
time, for the output volume is high.
DYNAMIC RANGE:
When “LINE OUT” is selected, choose this setting to adjust the line out ratio and get a
different effect. If adjusting to FULL, the audio signal peak value will be the minimum;
while adjusting to OFF, maximum.
NOTE:
This option will be valid when DOWNMIX is set to OFF.
DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode; There are four modes in this
option: STEREO, MONO L, MONO R, and MIX MONO; It is mainly used in karaoke mode.
REFERENCE:
z
Player will not be used for a longer period of time, please pull out the mains plug from
