Playing a Disc
Press on the Player or
PLAY/ PAUSE
( ) on the remote control to start play.
1.Make sure the unit has the power either from the battery pack or the AC adaptor.
2.Loading a disc, following these steps:
Open the top cover by pushing the latch to the right and lift the top cover.
Press the
OPEN
button to open the disc compartment cover.
Place a disc into the tray with the label side facing up.
Close the disc cover.
3.Slide
INPUT/OUTPUT
to
OUTPUT
(located on the side of the player).
4.Turn on the Power
Slide
POWER
to
ON.
Press
STANDBY
on the remote control to turn on the Player. You can also press
PLAY
( ) on the Player to turn on.
Preparation for Playback
PLAY/PAUSE
STOP
Press once to stop playback.
To Turn On The Player
1.Slide
POWER
on the Player to
ON
, this will put the Player on standby mode.
2.Press on the Player to turn on the power.
3.You can also press
STANDBY
on the remote control to turn on the power.
To put the Player on standby mode
Press
STANDBY
on the remote control.
To Turn Off The Power
Slide
POWER
on the Player to
OFF
.
5
13
Turning ON /OFF the player
