LENCO DTVR-700, Руководство пользователя

Страница: 10 / 39

3. / CH-
Moving cursor down/ channel subtract
4.
1) Moving cursor left subtract
2) Press these buttons to adjust LCD mode when in LCD mode
5. ENTER
Confirm settings
6. SETUP
Set the system information when the unit is in DVD or ATV or DVB-T mode.
7. SNOOZE
When the alarm is on, press SNOOZE to cancel the alarm.
The alarm will be on again after 5 minutes.
Note: If you press some other key (mode, menu, enter…etc.) to cancel the alarm, the alarm
will be stopped completely.
When no button is pressed, the alarm will stop completely after 5 min.
8. MODE
(1) Press this to select DVD or DVB-T or ATV or RADIO or AV-IN mode, and then press
/ / ENTER or M+/M-(the remote control) to confirm.
Note: 1)The unit will stop play the disc when it is in AV input mode
2) Please do not connect signal input when the unit is in AV output mode
3) DVD mode is the default mode.
(2) Press this to switch LCD mode: Brightness, Contrast, Color, TFT display mode, PAL
Plus (only for ATV mode), then press / / ENTER or M+/M-(the remote control) to
adjust.
1) Brightness: level 0 level 32
2) Contrast: level 0 level 32
3) Color: level 0 level 32
4) LCD display mode: switch screen size 16:9 or 4:3
5) PAL Plus: In ATV mode, set PAL Plus ON or OFF .
9. POWER
Power on/off the unit
10. Open TFT cover
11. TFT cover
5.4 Parts on the right side of the player
06