Battery Power Operation
AC Operation
1. Open the battery compartment
cover and insert two 'AA' alkaline
batteries inside the battery
compartment. Follow the polarity
as indicated on the bottom of the
cabinet.
2. Close the battery compartment
cover.
1. Insert the DC plug, at the end of the
AC adaptor cord into the DC input
jack, at the rear of the unit.
2. Plug the AC adaptor into a 120V
AC power outlet socket.
If the AC plug of this unit
does not fit in your AC outlet, a plug
adaptor (not included) should
used.
Consult your local dealer on the type
of plug adaptor required.
Note
be
1. POWER SOURCES NORMAL BATTERIES/AC ADAPTOR
4 Hours
MP3 play
Mode
Battery Type
Average Playing
(Continuous Play)
Time
Ni-CAD
rechargeable
(min. specification
recommended
1.2V-650mA)
Alkaline
MN 1500, LR 6
or Equivalent
Note: Zinc/Carbon, or Zinc/Chloride type
batteries are not recommended for this unit
as their use will result in extremely short
playing times. Wherever possible and for
economy it is recommended that the
mains adaptor supplied with this unit is used.
2 Hours
6 Hours
3 Hours
CD Play
Mode
2 x LR6 "AA" alkaline battery
WARNING
ENSURE THAT THE BATTERY
CHARGE SWITCH IS OFF WHEN
USING THE AC ADAPTOR WITH
NON RECHARGEABLE
BATTERIES INSTALLED.
2. DIGITAL ANTI SHOCK OPERATION
AND RECHARGEABLE BATTERY OPERATION
+
DIGITAL ANTI SHOCK OPERATION
RECHARGEABLE BATTERY OPERATION
1. Open the battery compartment cover and insert two of the recommended
rechargeable batteries, matching polarity. (1.2V 650mA)
2. Plug in the AC adaptor and set the Recharge switch to ON position to start
charging. During charging the RED LED charge indicator will illuminate.
3. After 15 hours. Please unplug the AC adaptor and switch the Recharge switch to
the OFF position.
ALL BATTERIES MUST BE OF RECHARGEABLE NICKEL-CADMIUM TYPE,
OTHERWISE THE BATTERIES MAY EXPLODE OR LEAK.
USE ONLY THE AC ADAPTOR SUPPLIED WITH THE SET FOR CHARGING
DO NOT CHARGE CONTINUOUSLY FOR 24 HOURS OR MORE. DOING SO
CAN CAUSE THE PERFORMANCE OF THE RECHARGEABLE BATTERIES
TO DETERIORATE.
This player incorporates the latest digital anti shock circuit, which prevents
interruption of the sound output if the unit is subjected to shock or vibration during
disc playback. The anti shock system will automatically start when a disc is played,
is shown in the display during start up. If the anti shock function is not required
then it can be switched off by pressing the ESP button.
To turn this function off press the ESP button.
1. When using the ANTI SHOCK function the battery power consumption
increases because the disc rotates faster than normal and the dynamic memory
is active.
2. Whilst the ANTI SHOCK function provides for continuous sound output when
the unit is subjected to shock or vibration. It will not correct errors arising from
the use of defective scratched or dirty discs.
3. When powering the player solely from batteries, only use the ANTI SHOCK
function where necessary to preserve their life.
Notes:
ESP
