6
it in Bluetooth searching device mode and in connection range.
3.
If no device found in some seconds, then the Bluetooth Speaker will
automatically turn into pairing mode.
4.
Now you can process for new mobile device pair. (refer to item D.3 ~
D.6 methods)
G.
Switch to new pairing from connected mode
1.
In Bluetooth connected mode, you can switch the Bluetooth Speaker
into Bluetooth searching mode for paring with the new device at any
time you desired;
2.
Press and hold the
“ (8)”
button until a series of tones sound and
the
“Bluetooth (13)”
LED will turn to fast blinking in blue from
lighting.
3.
Now you can process for new mobile device pair. (refer to item D.3 ~
D.6 methods)
H.
Use NFC for fast Bluetooth pairing
a.
On Bluetooth Speaker:
1.
Slide the
“Power Switch (2)”
to
“ON”
position.
2.
Make sure that the NFC detection mark
“
(12)”
is at the right
place to touch.
b.
On Mobile Phone:
1.
Make sure that the mobile phone has the NFC function turned on and
the screen is active (unlocked).
2.
Touch the mobile device NFC sensor on the Bluetooth Speaker’s NFC
detection mark. Keep touching until the mobile device vibrates and or
sound. (When the devices connect, some mobile phone may pop up a
dialog box to confirm on it screen)
3.
After pairing is successful; from Bluetooth speaker, a tones will sound
and the
“Bluetooth (13)”
LED will keep lighting in Blue from blinking.
4.
To disconnect the Bluetooth Speaker from an NFC connected phone,
touch it with the mobile device again.
Hint:
If you cannot connect the unit, try the following:
Move the mobile phone slowly over the “NFC” mark of the Bluetooth
Speaker.
If the mobile phone is in case (especially metal), remove it from the
case.
I.
Bluetooth Music Playing Controls (two way function)
a.
On your Bluetooth Device:
1.
Switch to music player menu and choose a music to start the play
from playlist or by using “
/
” button/icon. Play/Pause the
playing music by using “ /
” button/icon.
2.
To adjust the volume level by using the device’s volume control
