LENCO 8711902066156, Руководство пользователя

Страница: 15 / 103

- EN 15 -
select the preset number under which you will store the station. Press [ENTER] to confirm.
Bluetooth Mode
You must follow several steps to connect your mobile phone:
1. Activate Bluetooth from your mobile phone (please refer to your phone’s user manual)
2.
Press POWER button to turn on the unit, then press the MODE button repeatedly until the “Bluetooth
searching...” indicator appears on the LCD display. It will be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named “L enco DAR-051WD ”.
4.
Select “L enco DAR-051WD ” on your phone and it pres ent the option to connect or not. Please connect
to it using the password “0000” (if any). When you are successfully connected, the Bluetooth indicator
“Bluetooth connected” appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone have been
paired once, they will automatically connect when the unit is on and Bluetooth is activated on the phone. The
next time you power on, the unit will automatically connect to the most recently connected mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the button to play. Press the or button to skip the
tracks backwards or forwards. To pause or resume play, press the button again. Press and hold the button
to disconnect all paired Bluetooth devices.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if it
becomes dirty.
1.
Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly to select the CD function.
3.
Press the button to open the CD door and insert a CD into the tray (with printed label side facing
up).
4. Press the button again to close the CD DOOR and the disc will rotate for a few seconds, then play
the 1st track automatically.
5. To temporarily stop playback, press the button, and to resume playback, press it again.
6. Press the button to STOP play.
REVERSE/FORWARD
1. The and Buttons used to jump to a different track number or hold to scan disc tracks at high
speed.
2. Press the button once to skip to the beginning of the current track. Press it two or more times to hear
previous tracks on the disc.
3.
Press the button to start playing the next tracks on the disc.
4.
During playback, press and hold or buttons to find a specific passage within the track and
release it at the point you want to listen to.
5. Press and hold the button, the current track will be sped up towards the next track(s).
When the desired track section is found, release the selected button and normal playback will resume.
REPEAT FUNCTION
The REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback, the “REPEAT ONE” symbol will appear on the LCD display
for about 2 seconds. The same track will be repeated over and over.