LENCO 8711902040972, Руководство пользователя

Страница: 7 / 62

7
5. AUX-IN (3.5mm Jack)
An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or computer) can be connected to
this apparatus via the 3.5mm Aux-in Jack.
1. Plug a detachable Aux cable (not provided) into the 3.5mm Aux-in Jack at the rear of the unit.
2. Plug the other end of the Aux cable into the Headphone or Line-out socket of your External Source.
3. Power On the unit by turning the Volume Control Knob clockwise.
4. Rotate the Volume Control Knob to adjust the sound level.
Note: This unit complies with ERP2 regulation. Therefore the Lenco LS-40 will switch off to standby when there is
no audio signal (record or
Aux in ) during~20 minutes. To start using it again, please power off/on again.
The turntable has been secured for shipment with a transit screw. Use a coin or screwdriver to turn the transit screw
clockwise. This will allow the turntable to “float”. During transportation, make sure to tighten this transit screw by
turning counter-clockwise.
Lenco
Turntable LS-40
Type Belt drive full manual
Drive Motor DC motor
Speed 33 1/3 rpm, 45 rpm
Wow and flutter ≤0.35%
Turntable platter 253mm
Cartridge
Type N-10/Ceramic Cartridge 402-M208-015
Stylus 0.7 mil
Optimum Tracking force 4-6 grams
Output 160-380mV (HP-4005)
Frequency response -28db (10KHz)
Crosstalk 10db (1KHz)
Signal-to-noise ratio(S/N) 40db
General
Adapter
input AC100-240V~50/60Hz 0.5A