1
Thank you for purchasing the Lencarta SmartFlash 200
The Lencarta SmartFlash 200 is a compact studio flash unit suitable for mains powered studio
photography. It accepts the entire range of light modifying accessories with the S-type
bayonet fitting.
Features:
1. Consistent power and colour temperature output
2. Stepless power control over a 4 f/stop range (full power to 1/16
th
power)
3. Illuminated back panel
4. Fan cooled to enable constant use
5. Wide choice of light modifiers can be fitted to expand creativity
6. 200 J (Ws) of power
7. Flash ready beep
8. Can be triggered by wire sync, IR flash trigger or radio wireless trigger
Using your flash head
1. Do not dissemble the flash unit. The Lencarta SmartFlash 200 is a precision
instrument. It contains high voltage components. Unauthorised tampering with the
unit is dangerous and will void its warranty.
2. Do not leave the unit unattended when switched on.
3. To avoid risk of overheating, switch off the unit once the current studio session is
complete.
4. Do not use non-approved modelling lamps. Always use modelling lamps of the
correct wattage to prevent damage.
5. Do not leave the modelling lamps switched on when using restrictive lighting
tools such as honeycombs or spotlights. It will overheat and may be damaged.
6. Always switch off the unit when fitting or removing modelling lamp or cables.
7. Always remove the protective head cap before operating the unit.
8. Use only indoors, in a dry, ventilated environment.
9. Keep the flash tube and modelling lamp clean. Gently remove any dirt with alcohol.
10. Do not touch the flash tube with bare hands.
11. Fire the flash at least once every two months to prolong its lifespan.
12. Do not expose the unit to rain, vapour or excessive dust. Keep it away from
sources of fire and heat, including strong direct sunlight. Do not leave the unit in a car
in hot weather.
13. When working under high humidity, turn on the modelling lamp to dissipate any
condensation that may have gathered on the flash tube before using the flash
Setting up your flash head
1. The flash unit arrives with a protective cap fitted. The protective cap is designed to
protect the delicate flash tube during transit and we strongly recommend that you
keep this cap on whenever the flash unit is not in use. You must remove the
protective cap when using the flash unit.
