LeMond WattBox, Руководство пользователя

Страница: 6 / 10

Before you can pair the Watt Box must be properly installed on the LeMond
Revolution trainer (Pg. 4). It is important to stay at least 10 meters away from other
power-meters during this procedure.
Navigate to the ANT+ pairing screen on your cyclometer and select Search
(Figure 3.1)
.
*Note: The Watt Box is Power-Meter only. Please make sure that your cyclometer is set to search for
only Power-Meter devices during this operation.
Once pedaling, the Watt Box will awaken from sleep as it detects movement of the
Revolution’s pulley wheel. The green light on the Watt Box will illuminate, indicating
that it is now powered on. This motion will awaken the Watt Box from sleep mode
and begin the pairing operation. The green light on the Watt Box will illuminate,
indicating that it is now powered on.
After 2-3 seconds your cyclometer will show “Connected” once it has successfully
paired with the Watt Box. If not found after 10 seconds, repeat the pairing
procedure as indicated above.
This pairing operation only needs to be performed before use with a new cyclome-
ter. Once paired, your cyclometer will automatically link to your Watt Box.
6
PAIRING WITH COMPUTER
ANT + Sensors
Bike Profile
Search All