11
3. GETTING
STARTED
IO interface
This machine has an IO interface: the right body for the data line, battery charger, earphone
interface Mini USB interface to reuse.
Installing the SIM Card
· Keep all miniature SIM cards out of the reach of small children.
· The SIM card can be easily damaged by scratches or bending. So be careful when
inserting, removing or handling the card.
· Before installing the SIM card, always make sure that the phone is switched off and then
remove the battery.
Face the back of the phone, locate the SIM card holder, and then insert the SIM card into
the slot (in the direction shown by the arrows in the picture).Make sure that the gold contacts of
the card face into the face when installing the card.
Installing the T-FLASH Card
Keep the T-FLASH card out of the reach of small children.
· The T-FLASH card can be easily damaged by scratches or bending. So be careful when
inserting, removing or handling the T-FLASH card.
The machine T-FLASH card slot is located inside the fuselage, the T-FLASH card into the
12
T-FLASH card slot..
Removing and Installing the Battery
·
The steps of removing the battery
①
Pull the battery cover upwards from the bottom of the phone to remove the battery cover.
②
Lift the battery upwards; remove it from the battery compartment
.
Warning: Make sure that the phone should be switched off before removing the battery.
It’s absolutely prohibited to remove the battery when the phone is switched on or
connected to external power source, otherwise the SIM card and the phone will be
damaged.
·
The steps of installing the battery:
①
Insert the teeth on the bottom of the battery into the corresponding slots in the battery
tank, and then push the battery until it clicks into place.
Содержание Duo321
Страница 1: ...1 2...