User Manual B599
9
2.3
Turning the phone on
Press and hold
key to turn on/off the Mobile Phone.
And if you have set PIN or Mobile Phone code, input it correctly.
2.4
Charging the Battery
Ensure the battery is inserted in the handset. To charge the battery, plug in the charger connector
at the bottom of your phone (USB interface) and then plug the other end into an AC power
socket.
The battery symbol indicates the charging status. While charging, the charge indicators will scroll.
When all the scroll bars are steady, the battery is fully charged.
Disconnect the charger from the phone.
Disconnect the charger from the AC power socket.
Note: If the battery is powerless, the battery icon will reappear after a few minutes of charging.
The socket-outlet shall be installed near the equipment and shall be easily accessible
Warning:
Provides charging temperature range -5
℃
to 55
℃
, over this range, please do not use
the charging equipment. And be sure to use the charger provided by the supplier. Use of an
unapproved charger may be dangerous and breach of warranty of the equipment approval and
terms.
2.5
Important Password
Default Phone lock password is 0000.
2.6
Keypad Lock and Unlock
Enter into Menu > Settings > Phone settings >Display->Auto Keypad lock to make the function
on/off. In standby mode, if the time expires, the keypad will be locked automatically. Press the
Left Soft Key then * key to unlock the keypad.
2.7
Transfer files to the T-Flash (External Memory) card
Insert your T-Flash card into a card reader, and then connect the card reader to the USB port of a
PC. The PC will auto detect the card reader as a removable disk. You can access the T-Flash card
