LEMKEN 9/260, Руководство по эксплуатации

Страница: 12 / 26

10
6 THREE-POINT-LINKAGE
6.1 General Instructions
The mounting categories of the tractor and the implement must be compatible or
must be made compatible.
6.2 Vertical Adjustment of Drawbar
The drawbar (1) is vertically adjustable. In
case the implement can not be lifted
sufficiently from the ground or too much
tractor wheel slip will be experienced, the
drawbar must be fitted in the lower
position. In case the penetration is
insufficient, the pressure load on the roller
or rollers is insufficient or the tractor lift
capacity is insufficient, the drawbar must
be fitted in the upper position.
6.3 Change of the Drawbar Position
If required, change the drawbar position as follows:
Loosen bolts (S) of carriers (P), reverse carriers by 180 °, fit bolts (S) and secure.
Use Loctite and tighten nuts to a torque of 580 Nm.
•
Read and adhere to the General Safety Instructions! See section 1!