12
HAND REMOTE CONTROL
A
A1
B
B1
C
C1
D
D1
AUT
END
Button A:
lifting of the table
Button A1:
descent of the table
Button B:
lifting of the back
Button B1:
descent of the back
Button C:
lifting tilt (seat)
Button C1:
descent tilt (seat)
Button D:
lifting of the beck + seat
Button D1:
descent of the beck + seat
Button AUT:
automatic return from any position to table
position (horizontal and fully lowered) see §7.4
Button END:
automatic return from any position to “End of
treatment” positions.
7.7. Adjustment of the leg
To raise the legs, hold the end side of the mattress and lift. Five adjustments are possible. To return the leg in
the horizontal position, lift it until limit stop and release.
7.4. AUT Operation
Pressing the pedal/button AUT you start the automatic return from any position to table position in the se-
quence:
7.5. Adjustment of the head
The table is supplied standard with an American head, but on request it is
possible to add the head without a hole. The American head with a hole
in particular allows the forehead to be supported so as to guarantee an
opening sufficient to accommodate the patient’s nose when in a prone
position.
The headrest can be extended or removed, by releasing the butterfly
knob located under the back; it can be adjusted in different inclinations
by opening the black handle placed under the wooden support on
which the cushion rests.
1-
descent of the table
2-
waiting of about 20 seconds
3-
descent of tilt (seat/legs)
4-
descent of the back
