Lemeks Palmako Hanna, Руководство по установке

Страница: 6 / 41

Installation manual - English
Foundation
A good foundation is the most important aspect guaranteeing the duration and safety of your pavilion. Only
a completely level and bearing foundation will ensure problem-free installation of the pavilion, its stability
and especially the matching of the doors. With a good foundation, your pavilion will stand for many years
more.
Prepare the foundation so that its upper edge extends from the ground to a height of at least 5 cm. At the
same time make sure that there are sufficient air apertures under the pavilion floor for ventilation.
We recommend the following foundation options:
•
Strip or spot foundation
•
Foundation from concrete or pavement slabs
•
Cast concrete bed
Prepare the foundation so that the foundation joists are propped up on every side with intervals not
exceeding 50-60 cm.
Consult an expert in this field or have the foundation prepared by specialists.
Controlling of parts
Prior to assembly, please check the content of the package. With the help of parts list (included to this
installation manual) make sure that all the parts listed in the parts list are included to the package.
ATTENTION :
¾
You will find included in the pavilion package one spare log (longest wall log).
¾
You will find included in the pavilion package one spare board (longest floor board).
¾
The pavilion package also includes 2-3 marked hitting blocks (wall profile approximately 20-30 cm long).
All of the details listed above ARE NOT mentioned in the specification list.
¾
The drawings have the details marked with three-digit position numbers. The exact positions of those
details that have the third digit “x” can be found in the specification list.
3 Garden pavilion assembly
Preparation of components:
Sort the components based on the wall plans (see Technical specifications) and place them at the sides of
the pavilion in the installation sequence.
ATTENTION: Never place the components directly on grass or a muddy surface because it will be very
difficult or even impossible to clean them up later!
Base frame
The base frame (foundation joists) of the pavilion must be completely flat and level to ensure that the
installation proceeds without problems. Place the impregnated foundation joists on the prepared foundation
in accordance with the drawing (see Technical specifications) and screw them together.
ADVICE : It is recommended to place between the foundation joists and foundation a damp-proof course
that will protect the pavilion from moisture and decay.
ADVICE : To ensure protection from wind and storm, it is recommended to attach the foundation joists to the
foundation (for this, you can use for instance metal angles, anchors, etc.). The corresponding materials are
not included in the supplied kit!