Lemco Micro Line MLH-201, Руководство по эксплуатации

Страница: 12 / 23

12
In Figure No 8 we have general settings of the IP streamer as follows:
zx w
IP address: This is the IP address of the streamer for ping purposes.
zx w
MAC address: This is the MAC address of the streamer
zx w
IGMP: The user is able to select IGMP v2 or v3 or disable the IGMP.
The Status section provides a general view of how many programs and in what format
are currently being streamed from the device is its four outputs.
Peak Detection mechanism
As shown in Figure No 7 there is a colored indicator of the peak detection mechanism,
for each output transport stream. This indicates if any overflow has occurred on IP
streamer’s output bitrate with the following colors:
zx w
Green – No overflow occurred
zx w
Yellow – No overflow occurred but the input bitrate is close to the output bitrate
zx w
Red – Overflow occurred. The user must decrease the input bitrate
4.2.6 - “IP streaming” page
In “IP streaming” section the user is able to setup the IP streamer of the device.
Figure No 8