Lemco
HDMOD-Q1 manual v1.0
8
5
th
Step
Choose “
Profile
mode
” by pressing the Channel/Profile button (No
1
/ Figure No.1 )
The “Profile LED” will lit
indicating that “Profile” selection mode is selected.
6
th
Step
Repeat the procedure from step Νο 2 up to step Νο 5 for the rest of the modulators of
the HDMOD-Q1.
How Profiles works
In an installation all the modulators (or Mux in general) need to have different values
of the following fields to avoid conflicts in the automated scan of the TV sets:
Program Name
Service ID
TS ID
For that reason, the user must always select a different Profile number in every
modulator starting from Number #1.
Eg. Let’s say we want to install three modulators in a CATV network. In step No 4
we will choose:
•
Profile Νο
1
for the
1
st
modulator
o
meaning: Program Name = DTV
1
o
meaning: Service ID =
1
o
meaning: TS ID = 224
0
•
Profile Νο
2
for the
2
nd
modulator
o
meaning: Program Name = DTV
2
o
meaning: Service ID =
2
o
meaning: TS ID = 224
1
•
Profile Νο
3
for the
3
rd
modulator
o
meaning: Program Name = DTV
3
o
meaning: Service ID =
3
o
meaning: TS ID = 224
2
As a result, all the above modulators have different values in the above fields.
Caution!!!
•
Every time we choose a different Profile number, the HDMOD-Q1 will apply
a full reset to itself that will last for 40-50 seconds.
•
Using the USB interface, we have the ability to add custom values to the
above fields.
