Lemco HDMOD-2, Руководство по эксплуатации

Страница: 14 / 21

Lemco HDMOD-2 manual v1.0 14
APPENDIX Α
The HDMOD-2 offers a USB interface with the appropriate software (DVProbe.exe)
for advance programming. The software can be downloaded from
www.lemco.gr .
System requirements

Windows XP (SP1 or higher)

Windows Vista

Windows 7 (32 & 64bit)

Windows 8 (32 & 64bit)

Windows 10 (32 & 64bit)
Device connection via software
1. Insert the supplied software CD into your CD-ROM drive.
2. Connect the HDMOD-2 via the USB cable (A-male to B-male type)
3. In case Windows cannot install the USB drivers automatically, when prompt,
insert the correct path of the CD folder named “USB drivers”, which contains
the HDMOD-2 USB drivers.
4. Once Windows have successfully installed the USB drivers of the HDMOD-2,
a pop-up message appears to verify this process.
5. Run the DVProbe.exe file and the main screen will appear (Figure No 2):
Figure No.2