LEM DX 24, Руководство пользователя

Страница: 25 / 60

23
Store & Naming PRESET
This menu page allows to create new PRESETS, i.e. to save all the current system settings.
S t o r e P r e s e t
2 8 U 2 W + M S B + M A X
To save a PRESET:
☞
Use DIAL to reach the memory area in which the PRESET is to be saved.
N.B.: in this procedure, the Factory PRESET areas aren’t available, since the Factory PRESETS cannot be permanently
modified. Nevertheless remember that it is possible to load a Factory PRESET, save it in a User PRESET area, modify
it as required and then store it again in the same User area.
N.B.: scrolling through the memory areas, the display shows the number, type and name of the PRESETS contained
in them:
S t o r e P r e s e t
3 U O p e r a H a l l 1
☞
Press ENTER. The PRESET Naming page appears, by means of which it’s possible to edit the name
of the PRESET to be saved.
The name of the “start” PRESET (i.e. of the PRESET currently loaded) is proposed as default. The
cursor takes up position on the first of the twelve character spaces available.
P r e s e t N a m i n g
[ 2 W + M S B + M A X ]
At this point:
✧
If you decide to accept and confirm the name suggested, press ENTER.
✧
If you want to abort Naming procedure (for example because you’ve chosen the wrong memory area)
and return to Store PRESET procedure, press ESC.
☞
If you want to assign a new name to the PRESET you’re storing:
- use the
t
and
u
keys to position the cursor on the required character
- use DIAL to enter the alphanumeric value wanted
- after finishing, press ENTER.
P r e s e t N a m i n g
[ M W + M S B + M A X ]
P r e s e t N a m i n g
[ M y L i v e s e t ]
PRESET menu