LEM Products • West Chester, OH 45011 • 877-536-7763 • lemproducts.com
LEM Products • West Chester, OH 45011 • 877-536-7763 • lemproducts.com
2
3
GENERAL WARNINGS AND SAFETY INFORMATION
1. Disassemble and clean all the surfaces thoroughly.
2. Unscrew the three locking knobs that secure the clear top plate to the body of the Auto Patty Maker.
3. With the components separated, clean all surfaces thoroughly with soap and hot water or in the top rack of your dishwasher.
BEFORE USING
1. With the Patty Maker attached to your grinder, position the patty-forming slider all the way to the right or left.
2. Slowly begin feeding meat into the grinding head. Watch through the clear top plate as the patty chamber begins to fill.
3. When the patty chamber is completely full, push the patty forming slider to the opposite side.
4. Be ready to catch the perfectly formed patty as it drops from the well.
5. As the first patty drops into your hand, the next patty will already start forming.
6. Repeat this motion while continually adding meat to the grinder.
7. Do not feed the grinder faster than you can eject and stack your patties. If the patty-forming chamber overfills, meat will
begin to push between the slide and the body of the Auto Patty Maker.
MEAT GRINDER OPERATION
1. Disassemble the Auto Patty Maker.
2. Clean all components thoroughly with hot water and mild detergent.
3. Do not scour the clear top plate.
4. The Auto Patty Maker is top rack dishwasher safe.
After cleaning, make sure the Auto Patty Maker is thoroughly dried before storing.
CLEANING
1. Place the slider on the Auto Patty Maker, making sure the top side of the slider is facing up. The bottom of the slider is
completely flat.
2. Place the clear top plate over the slider, aligning the holes for the locking knobs.
3. Hand tighten all locking knobs to secure the clear top plate.
DO NOT
over tighten.
DO NOT
use tools to tighten locking knobs.
REASSEMBLY
1. Your Auto Patty Maker comes with a set of four adapter tubes. Using the retaining ring from your grinder, choose the
tube that fits your machine. The tube will fit inside the retaining ring just like a regular stuffing tube.
2. With the proper tube in place, attach the retaining ring to the grinder. Be sure the slot on the tube is facing down.
Note: On your grinder, install either the stuffing plate/spacer or the knife and cutting plate.
3. With the retaining ring tightened snugly, slide the mouth of the Auto Patty Maker over the tube end, aligning the groove
in the Auto Patty Maker with the slot on the tube. This will ensure that the clear plastic side is facing up.
4. Tighten the locking knob on the underside of the Auto Patty Maker firmly.
DO NOT
over-tighten the locking knob.
DO NOT
use tools to tighten the locking knob.
ATTACHING TO GRINDER
IT IS IMPORTANT TO READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFEGUARDS PRIOR TO USE
1. Read and refer to the instructions and safety warnings that came with your Big Bite Grinder prior to use of this
attachment.
2. Always ensure that the appliance is properly assembled and safely set up before use.
3.
DO NOT
leave the appliance unattended if it can be switched on and operated.
4.
CAUTION:
This appliance is not recommended for use near or by children or persons with certain disabilities. Set up and
store the appliance out of reach of children. When not in use, store device in a secure and dry place out of reach
of children.
5. Never feed food into product by hand as serious injury may occur, always use your stomper.
6. The appliance is designed exclusively for domestic use and not for commercial purpose.
7.
DO NOT
use the appliance on bones, deep frozen food, hard items or non-food items.
8 Use the appliance with the supplied accessories only. WARNING: The use of attachments not recommended or sold by
the manufacturer may cause injury, damage to personal property, and may void your warranty.
9.
WARNING:
Do not use while under the infuence of alcohol or drugs (prescription or non-prescription) as these may
impair user’s ability to properly assemble or safely operate the appliance.
10. Avoid contacting moving parts. Wait until all parts have come to a complete stop and disconnect from the power
source before removing any parts of the appliance.
11. Thoroughly wash all parts in warm soapy water prior to use.
12. Tie back loose hair and clothing. Remove neckties, rings, watches, bracelets or other jewelry before operating.
13. Use on a level, stable surface to prevent tipping. Never move the appliance while in use.
14.
DO NOT
use the appliance for other than intended use.
15. Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.
16.
DO NOT
attempt to disable any of the safety features that are in place. They are there for your safety.
17. The manufacturer declines any responsibility in the case of improper use of this product. Improper use of this product
voids the warranty.
18. Failure to follow warnings and a safety information could result in death serious bodily injury and or property loss.
19.
WARNING:
The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible
conditions or situations that could occur. It must be understood by the operator that common-sense must be used.
20.
SAVE THESE INSTRUCTIONS