LELY SPLENDIMO 280 FC, Руководство оператора

Страница: 27 / 30

innovators in agriculture
EN-25
C OPTIONAL EXTRAS
Wear plates
To avoid excessive wear and tear of the skids due to abrasion, the
SPLENDIMO mower can be equipped with wear plates that are fitted
underneath the skids.
These wear plates, which are available in thicknesses of 4 or 8 mm,
can be replaced easily and cost-effectively.
Topping skids
By fitting so-called topping skids underneath the skids, the cutter
bar of the SPLENDIMO mower can mow somewhat higher above
field level in rough conditions. In that case, the mowing height also
increases by approximately 3 cm so that the knives do not dig into
the ground as much. This may be important when mowing fallow
land or in nature landscapes.
The turf is spared because the knives do not dig into the ground. The
cutter bar is also spared since it is not hit by stones and branches, etc.
Agitators
In certain conditions, the mower discs may have difficulty
transporting the crop across the cutter bar. Agitators can be fitted
on the mower discs for this purpose.
These agitators provide a better grip on the crop, resulting in an
improved crop flow.
Crop divider
When mowing very long crops, grass that still has to be mown on the
right side of the machine may tend to accumulate. A crop divider is
available to ensure that crop that has not been mown is pushed to
the side and therefore does not accumulate.
V-belt pulley for 900 or 1,000 r.p.m. of
conditioner rotor
The conditioner rotor of the SPLENDIMO FC has a speed of 900 or
1,000 r.p.m. as standard. Another pulley is available for changing the
rotor speed.
This pulley allows the conditioner rotor speed to be adjusted to
prevailing circumstances (less intensive conditioning or improved
crop transport when dealing with heavy crops).
Supplement C