Lelit PS121, Быстрое руководство

Страница: 5 / 12

Pag. 5
English
COMPONENTS:
1. Safety cap
2. Wand seat
3. Iron switch with red led
4. Boiler switch with red led
5. Low water light indicator
6. Iron plate temperature regulating knob
7. Steam switch
8. Handles
USER INSTRUCTIONS:
1. Remove the ironing machine from its packing and make sure all packing parts have been taken off
(including the protection bags). Lay the machine on a flat and steady surface fitted to support it next to a
wall socket (max. mt. 1,5).
2. It is recommended to lay the iron on the supplied pad.
3. Insert in the right seat (2) the supplied wand to hold the hose up and hook it with the spring up to the
iron-boiler connecting wire.
4. Unscrew the safety cap (1) and let the internal air out. Fill the boiler with max. 1,1 litres of water for the
model PS121 and max 2.1 litre of water for the model PS125, using the supplied funnel and make sure
you do not overfill the tank.
5. Close the safety cap (1).
6. Insert the plug into the main supply point; turn on the boiler (4) and iron switch (3). If the two switchs
come on, iron and boiler are working.
7. Turn the iron plate’s temperature regulating knob (6) to the position “cotton °°°” (indicated on the iron
knob).
8. Wait till the boiler switch’s red light (4) goes off (it takes about 10 minutes for the model PS121 and
about 15 minutes for the model PS125). While ironing, the boiler switch’s red light (4) normally comes
on every now and again.
9. The machine is ready for use.
10. Press the steam switch (7).
11. In case the steam stops during ironing and the low water light indicator (5) comes on, it means that
there is not enough water in the tank. To start ironing again, switch off the boiler switch (4); press the
steam iron switch (7) to ensure there is no more steam in the boiler, turn off the iron switch (3), slowly
open the pressure cap (1), disconnect the plug and refill to the required level. After a couple of minutes
fill the boiler with possibly warm water.
12. When you first press the steam switch you might notice a decrease in pressure. In order to have plenty
of steam wait till the boiler switch indicator light (4) goes off.
CAUTION:
-
Do not leave the machine unattended while the plug is connected to the socket.
-
The iron reaches very high temperatures and it keeps being very hot even 15 minutes after it’s been
switching off. Be careful not to burn yourself.
-
For complete safety, before filling the boiler, please disconnect the plug.
-
While using the machine and 15 minutes afterwards the iron plate has very dangerous temperature – do
not touch it.
-
While using the machine, never unscrew or remove the cap while under pressure (1). Before removing it,
make sure that it does not release steam anymore from the iron.
-
The machine has a special heating element. Only qualified technician should replace it.
-
The safety cap (1) must be replaced with original parts only.
PLEASE NOTE:
The use of normal tap water is recommended. In order to clean the boiler and remove limestone, rinse it
internally (every 15-20 litres of water used or every month) only with tap water.