Lektri-Co SVIK, Руководство пользователя и инструкция по установке

Страница: 11 / 36

SVIK user and installation manual 11
3.7. TRANSPORT AND STORAGE
The SVIK charger must be transported with great care to avoid any impact
forces that might damage the product.
CAUTION
Do not put heavy loads on top of the charger’s
package.
Do not step on the charger, charging cable or
connector.
The SVIK charger must be stored in his package in a dust-free
environment with a temperature between -30°C and +60°C and relative
humidity of less than 96% non-condensing.
3.8. APPLICABLE STANDARDS AND CERTIFICATIONS
To ensure a high-quality product, SVIK was designed and manufactured
in accordance with the next standards:
• IEC 61851-1 Electric vehicle conductive charging system - Part 1:
General requirements.
• IEC 61851-22 Electric vehicle conductive charging system - Part 22: AC
electric vehicle charging station.
• IEC 60068 Environmental testing.
• IEC 60529 Degrees of protection provided by enclosures (IP Code).
• Directive 2014/30/EU regarding electromagnetic compatibility.
• BS EN 55032 Electromagnetic compatibility of multimedia
equipment. Emission Requirements.
• IEC 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2:
Testing and measurement techniques. Electrostatic discharge
immunity test.
• IEC 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4:
Testing and measurement techniques. Electrical fast transient/burst
immunity test.
• IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5:
Testing and measurement techniques. Surge immunity test.