13
12
Assembly & Maintenance Guide
Saddle.
Using a 5mm allen key, loosen the seatpost clamp
bolt and adjust the seatpost height. Ensure it’s at the
correct height for you, and tighten the bolt.
Tip: Your knee should slightly bend when the pedal is
at its lowest position while sitting on the saddle.
Handlebars.
Step 1: Now, using a 6mm allen key, loosen the bolt
located at the top of the handlebar stem, then insert
it into the frame. Once inserted, centre the handlebar
and stem and tighten it.
Step 2: To adjust the angle of the handlebar, loosen
the allen bolts of the front plate until you can move
the handle bar freely. Once you’ve found your prefer-
red bar angle, tighten the bolt.
02. Fitting the saddle
and handlebars
Tip: Should you wish to adjust the angles of your
grips, brakes and shifter, you can do so with a simple
turn of allen key 3 or 4. However, this should be cor-
rectly set already.
