Leitronic AG bebetelBluetooth, Руководство пользователя

Страница: 50 / 85

7
OFF ON
PROG
6 Operation
6.1 Preparation
Place bébétel
®
out of reach to your baby (approx. 1 to 2 m).
Note:
In Bluetooth-Mode the paired mobile phone (mobile A) has to
remain together with bébétel
®
in the child’s room
(1 – 3 m distance between mobile A 4 and bébétel
®
). The
telephone to be dialled (phone B) you take with you.
To avoid interference, do not place mobile A on top of the
bébétel
®
.
Check if the Bluetooth connection between bébétel
®
and mobile A
remains stable 6.10.
ƒ
Monitoring two rooms 7.4.
ƒ
To avoid false alarm close windows and diminish other noise sources.
6.2 Switch on
When bébétel
®
is switched to ON it checks the battery state and telephone-line condition. If
one of these tests fails the user will be informed by beeps as follows:
3 beeps: Battery is low 7.7.
6 beeps: Landline mode: Idle tone not detected 10.
Bluetooth mode: Mobile A not detected 10.
If bébétel
®
is connected to the landline the colour of the indicator changes
to green after approx. 5 seconds.
If no landline is detected, bébétel
®
tries to connect to mobile A. During the search the
colour of the indicator changes every second until the Bluetooth connection is established. If
so the indicator changes to blue.
If
bébétel
®
detects neither landline nor Bluetooth connection, it will emit six beeps to alert
you, that bébétel
®
is not ready to operate 10. As long as it remains in this state, the
colour of the indicator will continue to change every second
T
.
Note:
ƒ
Please always wait until the colour of the indicator is permanently green (Landline mode)
or blue (Bluetooth mode) every time you switch bébétel
®
on.
6.3 Waiting period after switching on or after a call
bébétel
®
remains inactive during a
waiting period
of two minutes so you
can leave your room without triggering a call.
To avoid unnecessary calls, bébétel
®
also remains inactive for two
minutes after each alarm.
Note:
ƒ
In landline mode the colour of the indicator during
waiting period
is permanently green.
ƒ
In Bluetooth mode the colour of the indicator during
waiting period
is permanently blue.
ƒ
You can skip the two minutes
waiting period
by pressing key 9 after the unit is turned
on. This allows you to perform a test of the level of noise that is needed to activate the
alarm call during the
monitoring mode.
English
q
2Min .
1 - 3 m