Leitch X75HD, Руководство по эксплуатации продукта

Страница: 48 / 62

How do you select multiple X75s from one remote panel?
You can control and monitor one X75 at a time. Pressing the Remote button on RCP brings up a list
of X75s on the network and you scroll down to the X75 that you wish to control/monitor and press the
ENTER key to select.
•
•
•
•
•
•
•
•
•
•
•
•
When will the X75 control panel be capable of CCS-TRAX?
Yes, there will be a future software release for this feature.
How does the Auto-Detect Setup work?
The user must set the I/P Video mode parameter to Auto Detect instead of factory default of User
Select. Then you can pick the precedence level to set the selected input as primary, secondary, tertiary,
etc. inputs for auto-changeover.
Can the RCP-CCS-1U control many X75s?
Co-Pilot software is used to discover devices (
X75s
) and device parameters (controls on a
X75
). You
can drag and drop discovered devices under the RCP-CCS-1U control panel to build its menu
hierarchy. The menu hierarchy can be rearranged, and entries can be renamed.
You can right-click on a device, popup a window with its parameters list, and select which ones to
show as favorites. Favorites selections for a device can be copied to another device of the same type.
Control panel configurations can be copied to other control panels. Once completed, a control panel
configuration is downloaded to the panel. (This is a future software release.)
Can the RCP-CCS-1U control the X75HD, DPS-475 and DPS-575?
Yes. However, to control the DPS-475 and DPS-575, the CCS-DPS-575 Gateway is required (up to 20
units per gateway). (Available August 2005)
What is the window for audio delay/advancing?
8 frames total delay for HDTV, 4 frames total delay for SDTV (1 frame default, enable up to 4 frames)
and 1.2 seconds total delay for audio.
Is there variable video delay?
There is up to 4 frames of delay in the SDTV path and up to 8 frames of video delay in the HDTV
path.
If Pilot/Navigator software is being used, can I recall pre-sets by name? (i.e., “Sports Configuration,” “News
Config,” “Studio Config." etc.)
Yes, the convention naming used by Windows allows for naming presets.
Will the X75 remote and local control panels control DPS-475 and DPS-575?
Yes, and the DPS-475 and DPS-575 local and remote panels can control X75s from the text based
menu control.
How can the X75 be controlled from 3
rd
party automation software?
The
X75
has a proprietary binary protocol available so that 3rd part control and monitoring can be
done over Ethernet.
Video Questions
What technique is used for video upconversion?
10-bit resolution processing, adapts to motion for de-interlacing, optional SDTV noise reduction
Page 46 • Frequently Asked Questions X75 Product Guide