How to Set Up the Leisurewize PortawashPlus
Preparation
To set up the Leisurewize PortawashPlus, please follow the instructions below:
1. First, remove the Leisurewize PortawashPlus out of its packaging and dispose of the packaging in
the correct manner.
2. Position the PortawashPlus, using the ergonomic handles on the side, on a flat surface/ground
and make sure it is located near your water source and drainage.
3. Then, use the provided water inlet hose and connect it to the inlet (4) of the washer on the
PortawashPlus. Once in place, connect the other end of the water inlet hose to the water tap.
Please ensure the water tap is switched off when connecting the hose.
Attention: When connecting the inlet hose to the water tap, you may need an adaptor
(not included) to ensure a secure fit.
Connect the PortwashPlus to a 230V mains power supply.
Wash Settings
The Leisurewize PortawashPlus has two wash settings that can be found in the wash selector/drain
knob. See table below.
How to Use the Leisurewize PortawashPlus
To set up the Leisurewize PortawashPlus, please follow the instructions below:
Attention
When turning or setting both timer knobs (wash timer & spin timer) on the Leisurewize
PortawashPlus, please make sure you always turn it clockwise.
1. Wash
Please see the instructions below on how to use the Leisurewize PortawashPlus for washing clothes.
1. Fill the wash drum (6) with water to an appropriate level. This will depend on the type of
clothing and its weight.
2. Select which wash setting you want to use, using the wash & drain selector knob. See table
under Wash Settings.
3. Place the clothes into the wash drum (6). Adjust the water level as required. To adjust the
water level (if necessary), turn the wash selector/drain knob (11) to drain the water. To stop
the drain, position the knob back to your chosen wash setting.
4. Add the appropriate amount of wash detergent.
5. Close the lid.
6. Once everything is set, you’re ready to start the wash. To start the wash, set the timer on
the wash timer knob (10) and the wash will start.
7. When the wash has finished, turn the wash selector/drain knob (11) to drain all the water
from the wash drum. Please note, when turning the knob to drain, please apply extra force.
2. Rinse
1. If necessary, wring the clothes out (to remove excess detergent).
2. Fill the wash drum to an appropriate level with clean water as before.
3. Repeat the wash process, but WITHOUT any detergent. This will rinse any remaining
detergent from the clothes.
4. When the rinse has finished, turn the wash selector/drain knob (11) to drain all the water
from the wash drum.
3. Spin
1. Remove the water inlet hose from the washer inlet (4).
2. Transfer all the clothes from the wash drum (6) to the spin drum (2), if necessary wring the
cloths again to remove excess water. Ensure you place the removeable spin cap (1) on top
of the clothes.
3. Set the spin timer to a suitable length of time to start the timer.
4. Repeat the rinse process & spin again if necessary.
4
5
Wash setting
Suitable fabrics
Gentle
Polyester or acetate synthetics (i.e. sports
wear), and other lightweight fabrics
Normal
Cotton, denim & polyester
