Installation Instructions - Updated as of 03/18/20
Page 1
Smartop Upright 3.0 DeckMount 200318
Upright 3.0
DeckMount
Figure 2
Step #1
Position the Smartop (in closed position) on the spa making sure that all four
corners are properly positioned and square on the spa.
Step #3
Attach the ball stud, washer, plastic spacers and locknut to the Smartop deck-
mount mounting bracket
(see Fig. 2)
.
Step #6
Attach the Smartop deckmount mounting bracket to the deck using the
supplied hex lag bolts
(see Fig. 4)
.
Note: If the Smartop deckmount mounting
bracket does not contact the deck, you may need to shim the bracket with wood
in the thickness needed.
Step #5
Attach the Smartop 3.0 deckmount mounting bracket to the Smartop 3.0
cover mounting bracket, in the bottom hole, using the supplied 3/8 x 2”
button head socket bolt, washer and locknut
(see Fig. 4)
.
Note: Make sure to
use one plastic spacer in between the Smartop deckmount mounting bracket and
the Smartop cover mounting bracket where the bolt goes through.
Figure 1
EAS Bracket
EAS Handle
Button Head
Socket Bolt
Step #2
Attach the EAS handle to the EAS bracket using the supplied 5/16 x 1-1/4”
button head socket bolt
(see Fig. 1)
.
J
K
Step #4
Insert the 3/8 x 2” button head socket bolt into the top hole in the back of
the Smartop cover mounting bracket. Make sure to install the rubber stop
on the button head socket bolt once you insert the bolt through the outside
flange of the Smartop cover mounting bracket. Secure the 3/8 washer and
locknut to the opposite end of the button head socket bolt
(see Fig. 3)
.
Note:
Do not overtighten locknut
.
Ball stud
B
Locknut
C
Smartop
DeckMount
Mounting
Bracket
A
Figure 3
Washer
Locknut
Button Head
Socket Bolt
F
G
E
Rubber
Stop
I
Cover
Mounting
Bracket
Figure 4
Washer
Locknut
Button Head
Socket Bolt
F
G
E
Plastic
Spacer
H
Lag
Bolt
L
Plastic
Spacer
H
Washer
O
