Leisure bay spas Genius G-2.5, Руководство пользователя

Страница: 8 / 22

6
REMOVAL OF CABINET PANELS
(For Use By Qualified Professionals Only)
!. Remove and reserve the Phillips head screws that secure the left
and right corners of the front cabinet panel.
WARNING: Shock Hazard! No User Serviceable Parts.
Spa Cabinet panels should be removed by qualified spa service professionals only!
2. Remove and reserve the Phillips head screws that secure the top
and bottom edges of the cabinet panel.
3. Slide the panel down, then all the way to the left, then pull out from
the side. 4. Remove panel and store in a safe place. For installation follow steps
1 through 3 in reverse order.
GROUND FAULT CIRCUIT INTERRUPTER
Should a G.F.C.I. circuit test fail immediately disconnect the power plug and contact a
certified licensed electrician to diagnose and correct the problem.
Your Leisure Bay Spa has a factory mounted power cord which is equipped with a Ground
Fault Circuit Interrupter “G.F.C.I.” built within the plug housing.
The G.F.C.I. has two mode buttons. The first is labeled “Test.” This button has a dual
function. First it acts as a disconnect switch. Depress this button and power to the spa is
disconnected. The same action is preformed to test the G.F.C.I. circuit.
The second button labeled “Reset” also has two functions. The “Reset” button is also the
connect (on) switch. Depressing the “Reset” button returns power to the spa equipment.
This same button is used to “Reset” the G.F.C.I. during a test cycle. See page 1 number
4A.