8
7
8
5.2 Retooling for different welding widths
To retool to a different welding width, proceed in accordance with the sequence described below.
Allow the device to cool down in Cool Down mode.
Before beginning with dismantling work, make sure that the
power cord (1)
is disconnected from the
mains.
1. Release the cheese head screws M5 × 30 on the two
drive/pressure rollers (7)
(screw length varies depending
on roller type).
2. Remove the
drive/pressure rollers (7)
.
3. Mount the new
drive/pressure rollers (7)
.
4. Retighten the new M5 cheese head screws.
5. Release the hexagon socket screw.
6. Remove the
welding nozzle (8)
that is currently mounted.
7. Insert the desired
welding nozzle (8)
.
8. Adjust the
welding nozzle (8)
Adjust welding nozzles 7 [5.1]
9. Retighten the hexagon socket screw.
Step 1: Safety precautions
Step 2: Adjusting the roller width (analogous to the 15, 30, or 40 mm welding nozzle)
Step 3: Changing the welding nozzle (15, 30 or 40 mm)
Cheese head screw M5
Hexagon socket screw
