DESCRIPTION OF TOOL
LEISTER TWINMAT
8
Memory card
Printer
Alarm
(audible)
Language
Date/ Time
Diagnosis
S
If the welding data needs to be stored on a memory
card, before starting the welding process, the operator
should set the memory card level to
ON.
(See special
operating instructions for Memory Card).
The following data is stored:
– welding speed
– welding temperature
– pressure
– seam thickness reduction
– ambient temperature
– length of welding seam
If there is a deviation from the seam thickness reduction
tolerance, an audible signal is activated. This signal can be
set to
ON/OFF
on the alarm menu.
The welding operator has a choice of different langua-
ges.
• German
• English
• French
• Italian
• Spanish
Depending on the choice, the terms are shown in the
selected language on the display. This should not be
changed during the welding process.
The welding operator can make changes to time and
date on the Date/Time menu.
(Summer/winter time, different time zones).
Adjustments are made at the factory on the Diagnosis
menu. The welding operator has no access to this menu.
S
S
S
S
1
2
Slacken the paper feed with the
tension lever (1).
Feed in
paper (2).
Pay attention to the direction of
the arrow.
Tighten the paper feed with the
tension lever (1).
