13
Leister BITUMAT B2
Automatic hot-air welding machine
Handheld hot-air welding machine for overlap welding of modified bitumen membrane liners (SBS, APP) in the open
air or in well ventilated rooms, for various roof systems, on horizontal and shallow-pitched flat surfaces.
Application
Please read operating instructions carefully before use
and keep for future reference.
Operating Instructions
(Translation of the original operating instructions)
GB
Danger to life
when opening the device as live components and connections are
exposed. Unplug the line/mains plug from the plug socket before opening the device.
Incorrect use of the hot air tool can present a
fire and explosion hazard
especially near combustable materials and explosive gases.
The tool must be operated
under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by
qualified specialists
or under their super-
vision. Children are not authorized to use this device.
For personal protection, we strongly recommend the tool be connected to an
RCCB
(
R
esidual
C
urrent
C
ircuit
B
reaker) before using it on construction sites.
Rated voltage
stated on the device must correspond to line/mains voltage.
In the case of
line/mains power failure
extract hot-air blower and set
main switch to position
0
Do not touch
hot welding nozzle, they can cause
burns
. Allow the tool to cool
down. Do not point the hot-air flow in direction of people or animals.
FI
230
400
Warning
Caution
Connect tool to a
receptacle with protective earth terminal
. Any interruption of
the protective earth conductor inside or outside the tool is dangerous !
Use only extension cables/cords with protective earth conductor !
Protect the device
from damp and wet.
