18
How do I start the automatic hot-air welding machine VARIMAT V2 ?
1. Connect power supply cord to the line/mains
2.
Main switch (3)
ON
ON
3. Press Drive button
Turn e-Drive
4. Press Heating button
Turn e-Drive
5. Press e-Drive
Heating up time approx. 3 – 5 minutes
6. Carry out a test weld according to the welding instruction of the material manufacturer
and national standards or guidelines. Approve test weld.
7. Welding
How do I switch off the automatic hot-air welding machine VARIMAT V2 ?
1. Press e-Drive
(Fig. 1).
2. Press «
Cool down OK
» e-Drive
and allow to cool approx. 4 minu-
tes (Fig. 2). Blower switches off automatically.
3. After
welding nozzle (9)
has cooled down,
main switch (3)
OFF
OFF
Congratulations on purchasing an automatic hot-air welding machine VARIMAT V2 !
You have chosen a top-class automatic hot-air welding machine made of high-quality materials.
This device has been developed and produced according to the latest welding technologies.
Every VARIMAT V2 passes stringent quality checks before leaving the factory in Switzerland.
Table of contents
Quick info
Page 18
Application, warning, caution
Page 19
Conformity, disposal, technical data
Page 20
Description of device, controls
Page 21
Transport
Page 22
Joining force, operating preparation, drive sensor adjustment
Page 23
Device positioning, welding procedure
Page 24
Button combinations
Page 25
Work mode (chapter 1)
1.1 Setpoint display
Page 25
1.2 Work display
Page 26
1.3 Setting the drive speed
1.4 Setting the welding temperature
Page 27
1.5 Setting the air volume
1.6 Length measurement, blower and drive counter
Page 28
1.7 Selecting profiles
1.8 Cooling down
Page 29
1.9 Standby
1.10 Error messages
Page 30
Profil setup (chapter 2)
2.1 Creating profiles
Page 30
2.2 Standby setup
Page 31
FAQ
Page 31
Types of Leister VARIMAT V2, accessories, training, maintenance, service and repair, warranty
Page 32
Quick info
(Fig. 1)
(Fig. 2)
GB
USA