LEIF GUIDE | 18
WWW.LEIFTECH.COM/GUIDE
RECOMMENDED REPAIR TOOLS
HEX KEYS
THREAD-LOCKING LIQUID
(LOCTITE OR SIMILAR)
SIZES
1/16 INCH
3/32 INCH
2 MM
2.5 MM
3 MM
4 MM
1.5 MM
Use to secure loose screws
***Always try a power cycle first***
Board doesn’t respond to remote
Motor noise intermittently while sliding
or riding
Motor makes noise all the time
Remote control is not connecting to
the board
Bindings are shifting while riding
Unplug both battery plugs, count to
ten, plug back in. This will fix almost
all problems that occur.
Verify Bluetooth connection.
Be sure to use the ENGAGE TRIGGER on
the remote. See trigger debug instructions
on page 10.
This is normal when electric motors are
slightly out of sequence while riding. This
can happen when going over debris, jumping
or sliding.
To get motors back into sequence, let go
of the trigger momentarily then re-engage
trigger. The noise can stop even with a fast
click of the trigger.
Most likely the motor has received physical
damage. The motor will continue working
despite the noise, but you may also email
[email protected] to purchase a
replacement.
Undergo the remote control sync sequence
(see guide page 10-11).
The binding mounting nuts and bolts need to
be tightened.
CAUSE OF PROBLEM
TROUBLESHOOTING
CORRECTIVE ACTION
LEIFTECH.COM/REPAIR
LEIFTECH.COM/REPAIR
