WASHING INSTRUCTIONS
Please note!
Both speakers must be removed before washing!
Step 1:
Control unit and speaker are located in two pockets at the bottom rim of the
beanie. You can push them gently out of those pockets.
Step 2:
At the beanie's back there is an opening on the inner side. Just push both parts
towards this hole and then take them out.
Step 3:
Now you can wash the beanie cold. Do not tumble dry. Then insert both
speakers the same way you took them out.
SAFETY NOTES
Keep the device away from humidity or liquids while charging. This may lead to
short-circuit.
Do not manipulate the device. For example: Do not disassemble, open, crush, stab,
microwave, incinerate or paint the device. Do not insert unsuitable objects.
Do not use abrasive cleaners to clean the device.
Do not expose the device to extreme temperatures (heat/cold).
Avoid open fire, like cooking fires, candles or bonfires.
Sharp objects may leave scratches or even damage the tracker.
Do not attempt to repair the device, modify or disassemble. It does not contain any
parts useful.
BATTERY NOTICE
Do not attempt to change the battery. It is built-in and not made for change.
Just charge the battery as described in the manual.
Avoid extreme high or low temperatures while charging.
Do not try to disassemble and open the battery by force.
Do not expose to open fire. The battery could explode which could lead to injuries
or death.
