Connecting the Smartphone to the Dockingstation
Note:
Please keep the correct order of connecting the devices in mind as the docking station
will not function perfectly otherwise. If an error occurs, please disconnect your
smartphone from the docking station, wait a moment until the software notices the
disconnect and then connect the smartphone again.
Before connecting your smartphone to the docking station, please check the correct
connection any other external devices. Most important of all is a flawless power supply
with a good power adapter, about 1 A at 5 V. The Micro USB cable for the power supply
of the docking station should have a sufficient width. If any problems occur, this has to be
checked first of all.
Depending on the connected devices your smartphone might react differently and offers
different features. Devices like mouse, keyboard or HDMI display should be connected to
the docking station
before
connecting the smartphone.
Connecting the CleverDock to an HDMI display.
1. Connect the CleverDock with a suitable power adapter. At least 1A charging
current, better 2A. Use a sufficiently wide micro USB cable. Some producers use
different configurations for the charging cables' plugs.
2. Connect the HDMI device with an HDMI cable to the docking station. Monitors
without HDMI input will not be supported! Please note, that an HDMI monitor has to
be connected for the playback of audio, as the smartphone will only then switch to
external output of audio signals.
The display has to be switched on or the
smartphone won't recognize it!
3. Put your smartphone into the CleverDock, the display will automatically be in
upright format. You can use the touch interface as normal.
4. To operate your smartphone more comfortable, we recommend to use an
external
keyboard
.
