"Q11". Once successfully paired the blue LED will blink slower and a signal tune is
played. When switched on again, the speaker will now connect automatically to the
last paired device.
Step 3:
To pair the speaker to another device, remove it from the list of the current
device, switch of the devices Bluetooth, switch off and on the speaker and the pair
with the new device.
Step 4:
When a micro SD is inserted, the speaker changes automatically to card
mode. To change mode again double click the On/Off button.
Music player:
To play music shortly press the On/Off button or the Play key on
your device, the "+" (forward) and "-" (backward). To adjust volume long press "+"
(volume up) or "-" (volume down).
Incoming Call:
In case of an incoming call a signal tune is heard. To answer shortly
press "+". Long pressing "+" will reject the call. To hang up press the On/Off button.
Fernauslöser für Smartphone-Kamera:
To use the speaker as remote shutter
release for your smartphone camera a Bluetooth connection must be set up. Now
switch on the camera of the smartphone and use either the On/Off button or the "+"
depending on your smartphone's model. Just try out which button works with your
phone.
Note:
To reset the speaker, take a thin device to use the reset button next to the
LED.
CHARGING THE INTEGRATED BATTERY
Charge the speaker with the included micro USB cable. When the battery is low the
speaker alerts acoustically. If not charged immediately, it switches off automatically.
The LED will stay on while charging. Once it has finished charging, the indicator
light will turn off.
NOTE:
To charge the speaker fully it must be switched off during the charging
progress.
