Charging the Smartphone
Step 1:
Put your smartphone onto the docking station's charging interface. For an
efficient power supply via Qi, the optimal charging position will be indicated with the help
of a magnet. Like this, the smartphone will be drawn in a perceptible way to the right
position. Try to avoid charging processes outside this zone to save energy.
Step 2:
Please wait a few seconds until your smartphone displays the charging
symbol. Charging will start automatically. Please note, that charging may take a while
longer compared to charging with a cable.
Step 3:
If the charging process does not start, take the smartphone away and then
put it back on to the interface.
Note:
You can also use a cable to charge your smartphone. For this purpose there are
ports at the front and the back of the docking station. This holds also true for
smartphones, tablets and accessories of other producers. Please charge your
smartphone or tablet before the capacity reaches less than 20% if possible, to ensure a
long life of your battery.
Energy Efficiency
As the needed power is transmitted without wire when using the Qi inductive power
standard, there will be a bit more power lost than with the use of a cable. Therefore,
charging the device completely will take more time in comparison to when a cable is
used.
SAFETY NOTES
Please avoid the following situations:
−
High humidity and contact to liquids like water or oil
−
Mechanical strains like impacts or drop downs
−
Heat or operating temperatures above or below the proper range
−
Connection of defective or faulty accessories or cables etc.
